Panasonic NE1757R Microwave Oven User Manual


  Open as PDF
of 32
 
- 10 -
How to Operate
3
5
Press Number/Memory pad “5”.
The selected pad number will appear and currently programmed
information will be indicated.
PROG
1
HI
4
POWER
LEVEL
Press Power Level Selector pad three times.
The selected power level will be indicated, 1st Stage Heating Indicator
“1” will start to blink, and Heating Time Display will go blank.
PROG
1
DEF
5
0 01
Press Number/Memory pads “1”, “0” and “0”.
The set heating time will appear.
Note: up to 15 min. on HIGH or MEDIUM power, 30 min. on DEFROST
PROG
1
DEF
6
PROG
Press Program pad.
“PROG” and 1st Stage Heating Indicator “1” will stop blinking.
This means that you have completed programming.
PROG
1
DEF
• Threesecondslater,DigitalDisplayWindowwillgoblank.
Note:
• ProgramtheremainingNumber/Memorypadsasdesiredbyrepeatingsteps1-6above.
• When“PROG”isblinkinginDigitalDisplayWindow,theprogramcanbecancelledand/oronetouchon
Stop/Reset pad erases the programmed Number/Memory pad number.
• WhenyouwanttoprogramtheBside,pressShift(A/B)padbeforeselectingthedesiredNumber/Memorypad.
C.
PROGRAMMING NUMBER/MEMORY PADS –– 2 or 3 stage heating ––
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (SEE PAGE 11-12)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute and at HIGH power for 2 minutes into
Number/Memory pad “5”
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
Follow steps 1 to 5 above.
PROG
1
DEF
6
POWER
LEVEL
Press Power Level Selector pad once.
The power level for 2nd stage will be indicated, 2nd Stage Heating
Indicator “2” will start to blink, and Heating Time Display will go blank.
PROG
21
HI
7
2 0 0
Press Number/Memory pads “2”, “0” and “0”.
The set heating time will appear.
Note: up to 15 min. on HIGH or MEDIUM power, 30 min. on DEFROST
PROG
21
HI
8
PROG
Press Prog pad.
“PROG” and 2nd Stage Heating Indicator “2” will stop blinking. The total
time for both stages will appear. This means that you have completed
programming.
PROG
21
HI DEF
• Threesecondslater,DigitalDisplayWindowwillgoblank.
Note:
• ProgramtheremainingNumber/Memorypadsasdesiredbyrepeatingstepsabove.
• When“PROG”isblinkinginDigitalDisplayWindow,theprogramcanbecancelledand/oronetouchon
Stop/Reset pad erases the programmed Number/Memory pad number.
• WhenyouwanttoprogramtheBside,pressShift(A/B)padbeforepressingNumber/Memorypad.
• For3stageheating,selectapowerlevelonceagainafterstep7andenterthetimedesired.
 previous next