Filter
Top Products
- 9 -
How to Operate
B. PROGRAMMED HEATING
In Program Unlock Mode: X
Example: To select Number/Memory pad “3” at A side in which your desired heating program (at HIGH
power for 3 min., single stage heating) is set
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Open the door and put the food in the oven.
The oven lamp will turn on and “0” will appear.
Note: While “0” appears, operation is available. One minute after the door
is closed, “0” will disappear.
2
3
Press the desired Number/Memory pad “3”.
The currently programmed information will be indicated.
PROG
1
HI
3
START
Press Start pad.
The oven lamp will turn on and heating will start. The heating time will
count down.
PROG
1
HI
• Whenalltimeexpires,beeptonewillsoundandheatingwillstop.Theovenlampwillturn
off. “0” will blink until the door is opened. One minute later, cooling fan will stop.
• Openthedoorandtakethefoodout.Theovenlampwillturnon.
• Closethedoor.Theovenlampwillturnoff.Oneminutelater,DigitalDisplayWindowwill
go blank.
Note:
• WhenyouwanttoselectthenumberatBside,pressShift(A/B)padbeforepressingthedesired
Number/Memory pad.
In Program Lock Mode: X
Just press the desired Number/Memory pad. Heating will automatically start without pressing Start pad.
For Double (or Triple) Quantity heating:
Press Double (or Triple) Quantity pad before pressing the desired Number/Memory pad.
C.
PROGRAMMING NUMBER/MEMORY PADS –– single stage heating ––
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (see page 11-12)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Keep the door closed.
Digital Display Window must be blank.
2
PROG
Press Program pad.
“PROG” will start to blink.
PROG