Panasonic NE1757R Microwave Oven User Manual


  Open as PDF
of 32
 
- 11 -
How to Operate
D. PROGRAMMING DOUBLE OR TRIPLE QUANTITY PAD
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCK IS ACTIVATED! (SEE PAGE 11-12)
DO NOT OPEN THE DOOR WHILE PROGRAMMING!
Example: To program 1.5 times of heating time for double quantity into Number/Memory pad “5”
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Keep the door closed.
Digital Display Window must be blank.
2
PROG
Press Prog pad.
“PROG” will start to blink.
PROG
3
5
Press Number/Memory pad “5”.
The selected pad number will appear and currently programmed
information will be indicated.
PROG
1
HI
4
x 2
Press Double Quantity pad.
The currently programmed magnification number will appear.
Note: 1.6 times is preset at factory.
PROG
5
1
5
Press Number/Memory pads “1” and “5” for 1.5 times.
The programmed magnification number will appear.
If pad 5 is programmed for 3 minutes, the time for the double quantity
will be 4 minutes and 30 seconds.
Available range is 0.1-5.0 times.
PROG
6
PROG
Press Prog pad.
“PROG” will stop blinking.
This means that you have completed programming.
PROG
• Threesecondslater,DigitalDisplayWindowwillgoblank.
Note:
• Ifyouwanttoprogramyourdesiredmagnificationnumberfortriplequantity,repeatasabove,usingTriple
Quantity pad instead of Double Quantity pad.
E. PROGRAM LOCK
To Activate Program Lock: X
Example: To program cooking at DEFROST power for 1 minute into Number/Memory pad “5”
PAD INSTRUCTION
DIGITAL DISPLAY WINDOW
1
Keep the door closed.
Digital Display Window must be blank.
2
PROG
Press Prog pad until “PROG”, “P” and “L” appear. (more than five
seconds)
“PROG”, “P” and “L” will appear.
PROG
In Program Lock mode:
• TheovenisstartedbypressingthedesiredNumber/Memorypad.ThereisnoneedtopressStartpad.
• Openingthedoorcancelstheremainingtimeontheprogram.
• Theovencannotbeprogrammedorrunmanuallyuntiltheprogramlockisreleased.
 previous next