Filter
Top Products
English Operating
Instructions
- En-10 -
Power Source
Power Consumption
Cooking Power*
Outside Dimensions (H x W x D)
Oven Cavity Dimensions (H x W x D)
Operating Frequency
Net Weight
* IEC Test Procedure
Specifications subject to change without notice.
As for the voltage requirement, the production month, country and serial number, please refer to the identification plate on the
microwave oven.
Technical Specifications
220 V 220 V 240 V
50 Hz 50 Hz 60 Hz 50 Hz
5.9 A 1,200 W 5.4 A 1,100 W 7.3 A 1,500 W 5.4 A 1,200 W
800 W
284 mm x 482 mm x 364 mm
218 mm x 325 mm x 330 mm
2,450 MHz
Approx. 11.0 kg
1.Turn the oven off and remove the power plug from
the wall socket before cleaning.
2.Keep the inside of the oven clean. When food
splatters or spilled liquids adhere to oven walls,
wipe with a damp cloth. Mild detergent may be
used if the oven gets very dirty. The use of harsh
detergent or abrasives is not recommended.
3.The outside oven surfaces should be cleaned with
a damp cloth. To prevent damage to the operating
parts inside the oven, water should not be allowed
to seep into the ventilation openings.
4.Do not allow the Control Panel to become wet.
Clean with a soft, damp cloth. Do not use
detergents, abrasives or spray-on cleaners on the
Control Panel.
When cleaning the Control Panel, leave oven door
open to prevent oven from accidentally turning on.
After cleaning press STOP/RESET Pad to clear
display window or make sure TIMER/WEIGHT
SELECT DIAL is set to zero position.
5.If steam accumulates inside or around the outside
of the oven door, wipe with a soft cloth. This may
occur when the microwave oven is operated under
high humidity conditions and in no way indicates
malfunction of the unit.
6.It is occasionally necessary to remove the glass
tray for cleaning. Wash the tray in warm sudsy
water or in a dishwasher.
7.The roller ring and oven cavity floor should be
cleaned regularly to avoid excessive noise. Simply
wipe the bottom surface of the oven with mild
detergent, water or window cleaner and dry. The
roller ring may be washed in mild sudsy water or
dish washer. Cooking vapors collect during
repeated use but in no way affect the bottom
surface or roller ring wheels. When removing the
roller ring from cavity floor for cleaning, be sure to
replace in the proper position.
8.When it becomes necessary to replace the oven
light, please consult a dealer to have it replaced.
9.Failure to maintain the oven in a clean condition
couid lead to deterioration of the surface that could
adversely affect the life of the appliance and
possibly result in a hazardous situation.
Care of your Microwave Oven