Filter
Top Products
Hotwire DSLAM System Description
1-3
8000-A2-GB26-00
May 1998
Hotwire DSLAM Components
The Hotwire DSLAM system consists of the following components:
H Hotwire DSLAM chassis
There are two types of chassis:
— The Hotwire 8600 DSLAM chassis is an independent, standalone
system. The stackable design provides for up to six chassis to share
management access through a single MCC card, which in turn, allows an
additional slot for a DSL card in each of up to five additional chassis.
INPUT
AC
48VDC CLASS 2 OR
LIMITED PWR SOURCE
RTN48V
AAB B
LAN/WAN SLOT
2
46
A
B
.
.
.
3
.
1
2
POSITION
STACK
ALM
A
IN
B
DC FUSES
T4A, MIN. 48V
5
PWR
FAN
OUT SERIAL
MCC 1
MANAGEMENT
3
LINE
1
2
3
SYSTEM
OK
Alrm
Test
TX
RX
Col
ETHERNET
MCC
8000
SYSTEM
OK
Alrm
Test
TX
RX
Col
1
2
3
4
ETHERNET
DSL PORT
RADSL
8546
SYSTEM
OK
Alrm
Test
TX
RX
Col
1
2
3
4
ETHERNET
DSL PORT
RADSL
8546
98-15350-0
2
ESD
In a stacked configuration, the first, or base chassis, must contain an
MCC card in Slot 1. In addition to the MCC card, the base chassis can
house up to two DSL cards. Each additional chassis in the stack houses
up to three DSL cards.
For more information about the Hotwire 8600 DSLAM chassis, see the
Hotwire 8600 Digital Subscriber Line Access Multiplexer (DSLAM)
Installation Guide
.