Filter
Top Products
PREVENTATIVE MAINTENANCE
24
L20-378 rev. 0 (9/12)
Typical French Fry Cook Times
Fry Thickness 350F 360F 370F
(177C) (182C) (188C)
Thin 2:45 2:30 2:15
medium 3:45 3:30 3:15
Thick 4:15 4:00 3:45
This table is for reference only. Please refer
to the product manufacturer’s specifications to
determine exact cook temperatures and
ti
2.4.4. ADDITIONAL CONTROLLER FUNCTIONS
Some controllers have additional functions not described in this manual. If your appliance’s
controller has additional functions, refer to the controller’s operation manual to access these
functions.
*The specified buttons and/or displays may appear slightly different then shown. Refer to
the operator’s manual for your appliance’s specific control type to determine the exact
appearance of each button and display.
2.5. COOKING TIPS
Always follow the food manufacturer’s directions.
The lower the oil temperature, the longer the cooking time and the greater the fat absorption.
NEVER overfill fryer baskets. Overfilling can result
in soggy, greasy product.
When removing baskets from the cook tank, shake
gently to remove excess oil.
Never leave a basket over the fryer. The heat from
the cook tank will continue to cook the product.
Oil/shortening quality can effect product quality.
Keep salt and water away from the oil/shortening to
maintain its life. Oil/shortening filtration removes
crumbs from the oil which will also extend its life.
2.6. APPLIANCE SHUTDOWN
There are two shutdown modes of appliance operation: STANBY and COMPLETE. The standby
mode removes the ability of the appliances main burners to operate. Complete shutdown turns off the
gas supply to the appliance. Refer to the following procedures to enter the appropriate shutdown
mode.
2.6.1. STANDBY MODE
1. Turn the temperature controller or thermostat OFF.
Solid State Thermostat:
Turn the I/0 (ON/OFF) switch to the I (OFF) position
Computer and Digital Control:
Press and hold the
*
button to turn the controller OFF.
*The specified button may appear slightly different then shown. Refer to the
operator’s manual for your appliance’s specific control type to determine the exact
appearance of each button and display.