Filter
Top Products
TROUBLESHOOTING
34
L20-378 rev. 0 (9/12)
4.7. COMPUTER & DIGITAL CONTROLLER DISPLAYS (IF EQUIPPED)
If your appliance is equipped with a computer or digital controller it may display the following
messages on its display.
Display Explanation Action
Appliance is in melt cycle
Continue with melt cycle or exit melt cycle to
return to normal operation.
Oil/shortening temperature is
low.
Wait for appliance to heat up.
The cook tank has reached the
set temperature.
Appliance is ready to start cook cycle.
Indicates program mode is
password protected.
Enter password or wait for controller to exit
program mode.
Incorrect probe reading. Contact Authorized Service Company.
Oil/shortening has reached an
unsafe temperature.
Turn off appliance. Allow ample time for
appliance to cool before turning on.
Incorrect probe reading. Contact Authorized Service Company.
Drain valve is open while
controller is on.
Turn off appliance. Close drain valve before
turning appliance back on.
Ignition system has locked out. Contact Authorized Service Company.
Controller is OFF. Turn controller on.