Filter
Top Products
Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
L22-355 Rev 1 Page 22 of 28
5.11 Test On/Off
With display showing press product key 0.
Display shows [TEST xx], where “xx” is ON or OFF. If ON is selected, temperatures
displayed by the controller are probe tip temperatures unaltered by values set in
section 4.1, or 5.1. For normal operations, this setting should remain OFF.
To change this value, use product key 0 to toggle choice (ON or OFF).
Press the
key. Display now shows .
5.12 More Factory Menu Entry
With display showing press product key R.
Display shows
.
R
5.12.1 Control ID Display
From the
display, press the [0] key.
Display will show [CONTROL ] [60149505], the Pitco part number, 60149505.
Press the [0] key again.
Display will show [S/W ] [0149501x], this is Pitco’s software number and current
revision letter.
Press the [0] key again.
Display will show [CHECKSUM] [00Fxxxxx], the software check sum of the loaded
software.
Press the [0] key again to repeat these items, or, press to return to
.
5.12.2 Set Network Address
This menu is identical to Set Network Address section 4.8.9 except
is
displayed instead of [SERVICE].
5.13 To Exit Factory Menu (Level 4):
To exit Factory Programming, Press the key. Display will show .
Continue with settings in section 2 or 3, or exit in the next step.
To return to normal operations, press the key again.
Display shows
; , or .
0
0
R