Filter
Top Products
Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
Page 5 of 28 L22-280 Rev 1
1.4 To cancel a cook:
Press and hold the product key to cancel a running cook. The controller displays
. Press the ‘6’ button to spin the basket and
the ‘0’ button to not spin the basket. If neither button is pressed after 15 second
the system will default back to
state.
1.5 To check Actual and Set temperatures:
To view the actual vat temperature, press the key. The display will show or
, where “F’ is Fahrenheit, and “C” is Celsius. After a few moments, the display will
return to [READY], [MELT ], or [HEATING] if no cooks are running. [CKn mm:ss] will display for any
cooks still running.
To view the set temperature, press the
key twice. The display will show or
, where “F’ is Fahrenheit, and “C” is Celsius. After a few moments, the display will
return to [READY], [MELT ], or [HEATING] , or, [CKn mm:ss] for any cook still running.
1.6 To View Current Settings for Cook, Shake, Hold, and Hold Pre-Alarm:
To view the current settings for any product key, press the key, followed by the desired
product key. The display will show [CKn mm:ss], followed by [SHn mm:ss], then [HDn mm:ss],
ending with [PA4 mm:ss]. Where “n” is the key number, and “mm:ss” is the time setting.
After a few moments, the display will return to
; , or ,
or, [CKn mm:ss] for any cook still running.
Typical displays using key 4 as an example:
Key 4 Cook Time [CK4] is set for 3 minutes and 28
seconds.
Key 4 Shake Time [SH4] is set for 2 minutes and 00
seconds before the end of the Cook. When this time is
met the cook will be suspended and basket will spin for
10 seconds unless Spin Time [ST4] is less than 10
seconds, then they are equal. The basket then returns to
the cooking position. Default value is 00:00, or inactive.
Key 4 Hold Time [HD4] is set for 2:00 minutes. This is
the amount of time cooked product may sit in holding bins
before a new batch is started. Default value is 00:00, or
inactive.
Key 4 Hold Pre-Alarm [PA4] is set for 00:00 and is
inactive (default setting). When activated his alarm
warns the operators that the Hold Time is about to run
out.
Key 4 Spin Time [ST4] is set for 00:30. When activated
this is the time that the basket will spin for at the end of
the cook. Default value is 00:30.
Key 4 Spin Rate [SR4] is set to 350. When active this is
the speed at which the basket will spin.
Default value is 350, or inactive.
+
4