Filter
Top Products
AMI
®
BIOS Setup
4-11
Setting to Off will allow end users to use the arrow keys on the numeric
keypad. Settings: On and Off.
Swap Floppy
Setting to Enabled will swap floppy drives A: and B:.
Seek Floppy
Setting to Enabled will make BIOS seek floppy drive A: before booting the
system. Settings: Disabled and Enabled.
Password Check
This specifies the type of AMIBIOS password protection that is
implemented. Setting options are described below.
Boot OS/2 for DRAM > 64MB
This allows you to run the OS/2
®
operating system with more than 64MB
DRAM. When you choose No, you cannot run the OS/2
®
operating system
with more than 64MB DRAM. But it is possible if you choose Yes.
L1 Cache
The item enables or disables the L1 cache memory for CPU. Setting to
Enabled will speed up the system performance.
Flash Protection
The item is used to enable or disable the BIOS Flash Protection function.
Select Disabled when performing BIOS update with the flash utility.
System BIOS Cacheable
AMIBIOS always copies the system BIOS from ROM to RAM for faster
execution. Selecting Enabled allows the contents of F0000h RAM memory
segment to be written to and read from cache memory. Settings: Enabled
and Disabled.
Option Description
Setup The password prompt appears only when end users try to
run Setup.
Always A password prompt appears every time when the com-
puter is powered on or when end users try to run Setup.