Filter
Top Products
Chapter 3
3-22
Hot Key Power ON
If POWER ON Function is set to Hot KEY, you can assign a hot key combina-
tion in the field for the PS/2 keyboard to power on the system. Settings: Ctrl-
F1 through Ctrl-F12.
Power Again
This item specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Power Off Leaves the computer in the power off state.
Power On Reboots the computer.
Last State Restores the system to the status before power failure
or interrupt occured.
Sleep State LED
This item sets how the system uses Power LED on the case to indicate the
suspend state. Settings are:
Dual The Power LED changes its color to indicate the
suspend state.
Blinking The Power LED blinks to indicate the suspend state.
** Reload Global Timer Events **
Primary/Secondary Master/Slave IDE, FDC/LPT/COM Ports
The global timer is the hardware timer that counts down to the power saving
modes. If the monitoring of the listed hardware peripheral or component is
enabled, they will awaken the system or reload the original count of global
timer when they are accessed.