Filter
Top Products
Chapter 3
3-26
Frequency/Voltage Control
CPU Ratio Selection
End users can overclock the processor by specifying the CPU ratio (clock
multiplier) in this field. Settings: x 8(Safe) to x 23.
Auto Detect PCI Clock
This item is used to auto detect the PCI slots. When set to Enabled, the
system will remove (turn off) clocks from empty PCI slots to minimize the
electromagnetic interference (EMI). Settings: Enabled and Disabled.
Spread Spectrum
This item is used to configure the clock generator’s Spread Spectrum feature.
Settings: Disabled, +/-0.25%, -0.5%, +/-0.5%, and +/-0.38%. Always
disable the feature when overclocking the processor.
CPU Host/PCI Clock
This item specifies the combination of CPU host bus (FSB) and PCI bus
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
CPU Ratio Selection [X 8(Safe)]
Auto Detect PCI Clock [Enabled]
Spread Spectrum [+/-0.25%]
CPU Host/PCI Clock [Default]
CMOS Setup Utility - Copyright(C) 1984-2001 Award Software
Frequency/Voltage Control
Item Help
Menu Level 8