Filter
Top Products
11
Delayed start programming
You can delay the start of a programme from 1 hour up to
24hours.
1. Open the door, switch the dishwasher ON.
2. Press programme button to choose the desired
programme.
3. Press the Delayed Start button (Fig.2-21); the time-
remaining indicator changes to ‘1’.
4. Press the Delayed Start button as many times as
necessary until the numerical display shows the
required delay.
5. To cancel the time delay setting, press the Delayed Start
button until the time remaining indicator goes out.
6. Press the Start/Reset button (Fig.2-22) and close the
door, the time-remaining indicator will blink and start
to count down. The programme will start when the
delayed start indicator goes out and the wash cycle will
begin.
To cancel a delayed start programme in progress, follow the
‘Cancelling or modifying a cycle’ instructions.
Reset drain function
You can use the Reset Drain function to stop the washing
cycle from running. Press the Start/Reset button for 3seconds
to reset. The dishwasher will stop after a few minutes drain
phase.
Delayed start button
Fig.2-21
Start/reset button
Fig.2-22