Filter
Top Products
12
Low salt indicator
ArtNo.800-0501 - Cleaning the filter 1
ArtNo.800-0502 - Cleaning the filter 2
Care
After Every Wash
After every wash, set the ON-OFF button to OFF and leave the
door slightly ajar so that moisture and odours are not trapped
inside.
Before cleaning or performing maintenance isolate
from mains.
Overall Condition of the Appliance
Check that no grease or scale has accumulated on the inside
of the dishwasher. If you discover any deposits: Clean the
interior of the dishwasher thoroughly with a detergent
solution.
Dishwasher salt
Check the LOW SALT indicator (Fig.3-1). If required, top up
with salt .
Rinse aid
Check the low rinse indicator (Fig.3-2) on the control panel. If
required, top up with rinse aid.
Filters
The lters prevent larger particles of food in the water from
reaching the pump. These particles may occasionally block
the lters.
When the appliance has nished washing, check the lters for
particles of food and, if required, clean.
After undoing the coarse micro-lter (Fig.3-3), the lter unit
can be removed (Fig.3-4). Remove any particles of food and
rinse the lters under running water.
Insert the lter unit and tighten the coarse micro-lter.
3. Looking after your Dishwasher
Fig.3-1
Fig.3-3
Fig.3-4
Low rinse aid indicator
Fig.3-2