12 Chapter 1
Getting Started
Operation: Step-by-Step Examples
The following example illustrates (with more detail than the previous information) how
you find the song you want to play.
1. These instructions presume you’ve already done the following:
• Installed the MusicMatch Jukebox software and the Lyra MP3/Personal Jukebox
profiler application (go to page 22 for detailed instructions).
• Transferred music from your computer to the Lyra Jukebox (page 31 has detailed
instructions) and profiled the contents of the Lyra Jukebox through MusicMatch
Jukebox or the Profiler software.
Note: The music you’re transferring could be from a CD you put in your computer,
the internet, or music you already had loaded onto your computer.
2. If you haven’t already unplugged the Lyra Jukebox from your computer, disconnect
the USB cable from the Lyra Jukebox.
Note: If you’re running Windows 2000, XP, or Me, you must stop the device before
unplugging it. Click the icon (the Unplug or Eject hardware icon) from the system
tray and select the USB Mass Storage device for the drive letter associated with the
Lyra Jukebox, and click STOP. See the Windows Help for details about the Unplug or
Eject Hardware topic.
3. If you’ve fully charged the battery (the Lyra Jukebox needs to be plugged in for
about 4 hours before the battery is fully charged), disconnect the AC adapter from
the outlet and then from your Lyra Jukebox.
Note: If the battery isn’t fully charged, keep the Lyra Jukebox plugged in while you
listen to the music you’ve transferred from your computer.
4. Connect the headphones to your Lyra Jukebox (insert the end of the headphones
connector into the phones jack on the side of the Lyra).
5. If your Lyra Jukebox isn’t already on, turn it on (press and hold the
button for
two seconds). The RCA Lyra logo flashes on the screen, and then the main menu
appears the SORT BY menu.