Filter
Top Products
7
Connection procedures
Screen appearance while device operating
Figure 6: Appearance of the screen while the device is operating
2.3 Respiratory circuit
According to the ventilation mode prescribed by your physician, you will
be using one of the following:
• A single circuit
• A single circuit with expiratory valve and with or without a pressure
line
• A double circuit.
To determine the type of respiratory circuit prescribed for you and for
instructions on connecting it to the device, see “Connecting the
respiratory circuit” on page 9.
3 Connection procedures
The device must be placed on a flat surface. Ensure the area is dust-free,
and cleared of any objects that could block the dust filter.
CAUTION
Be careful not to place the device where it could be knocked over
or where someone is likely to trip over the power cord.
Displays the
instantaneous
pressure
measurement
(in a bar graph)
27/06/2008 16:48
cm
H2O
9
60
50
40
30
20
10
0
PS.Vs
Stop
Charge level of
internal battery
Shows that the device is
in the Patient menu
(closed padlock)
Time
Message to help you navigate
Current ventilation program
Date displayed as
Day/Month/Year