Filter
Top Products
8
3.1 Connecting to a power supply
To connect the ventilator to mains power:
1. Plug the power supply connector into the rear of the ventilator (into
the socket marked , see next figure) .
2. Plug the power cord into the power supply box and fasten to
prevent accidental disconnection .
3. Connect the other end of the power cord to the mains .
Figure 7: Connecting the device to the mains power supply
Note: Skip step 2 if using a power supply unit with a fixed power cord.
Your device is now in standby mode.
WARNING
The power cord is equipped with a push-pull locking connector.
Gently pull the power cord to remove from the ventilator. Do not
twist its outer housing.
Notes:
If your device is fitted with a rechargeable internal battery it can be used
without a mains power supply for a period of 2–4 hours, depending on
your settings.
The battery recharges automatically when the device is connected to
the mains supply.
1
2
3
Fastening clip