Filter
Top Products
TO BAKE OR ROAST
Q
3
PUSH WHEN
FINISHED
TURNTO 2
SET TEMP
Q
TIMER CLOCK s:M4’ CLEAN FE;
BROIL BAKE
-------
mmmmmm
F
PUSH 1
6
The red display will show the oven temperature as it rises (in
5” steps).
A tone will sound when the oven is ready.
AUTOMATIC OVEN OFF
TURN TO SET
Q
ANCEL ’
J
TIMER CLOCK s:M9’ CLEAN ;‘E”
BROIL BAKE
-------
6 PUSH @ PUSH
The ERC will calculate when to turn the oven off.
When the stop time is reached, a tone will sound and the
oven will turn off I
DELAYED BAKE CYCLE
TURN TO
TURN TO
TURN TO
SET LENGTH
SET TEMP
SET OVEN
SET
J
TIMER CLOCK s:M4’ CLEAN ;y$; BROIL BAKE
-------
mm
F
-f--f-
,
6 6 d
PUSH
PUSH
PUSH
When cook time has ended, a tone will sound and the oven
will turn off.
TO USE THE TIMER
TURN TO
SET AMOUNT
2
OF TIME
0
\
TIMER CLOCK ;;M4’ CLEAN
;‘E” BROIL BAKE
-------
%-----
Nmmmmm
HOLD
3 SECONDS TO CANCEL
A tone will sound when time is up.
NOTE: The timer is a reminder only and will not operate
INCOMPLETE OR INCORRECT
SETTINGS
1.
2.
Attention Tone will sound if oven has only been partially
programmed. For example, if you have selected a cook
time but no temperature, you will hear the Attention Tone
until you select a temperature or push CANCEL.
Function Error Tone will sound if there is a problem with
one of the range functions. Cancel the tone by pushing
the CANCEL button. If the tone starts again, call for
service.
RECALLING FUNCTIONS
CANCELLING TONES
If you prefer that your range not have a tone whenever you
push a button, you can eliminate those tones by pushing and
holding the CANCEL button until you hear a beep. Repeat
to activate tones again.
PREHEATING FOR AUTOMATIC OVEN
OPERATIONS
Cook times programmed for automatic oven operations start
counting down when the oven first comes on, not when it has
reached the set temperatures. It takes 10 to 15 minutes to
reach the set temperature, thus additional cook time may be
You may recall any set function by pushing the button of that necessary.
function.
10
CCTLO l-7