Roper FGP335Y Range User Manual


 
The oven light
- The oven light will come on when you open
the oven door. To turn the light on when the
oven door is closed, use the Oven Light
Switch on the control panel.
Electrical Shock and
Personal Injury Hazard
make sure oven and light bulb are
cool and power to the range has been
turned off before replacing the light
bulb. Failure to do so could result in
electrical shock or burns.
*The bulb cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures. Because bulb
cover is made of glass, be careful not
to drop it. Broken glass could cause
injury.
To replace the oven light:
1. Disconnect appliance at the main power
supply.
2. Remove the glass bulb cover in the back
of the oven by pushing the wire holder to
the side and pulling out bulb cover.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
4. Replace the bulb cover and snap the
wire holder into place. Reconnect
appliance at the main power supply.
NOTE: Do not use the oven light during the
Self-Cleaning cycle. Use during the Self-
Cleaning cycle will shorten the life of the
bulb.
32