Roper FGP335Y Range User Manual


 
PROBLEM
POSSIBLE CAUSE
SOLUTION
Cooking
The range is not level.
Level range. (See Installation Instruc-
results are not
tions.)
what you
expected
The oven temperature seems
Adjust the oven temperature control.
too low or too high.
(See “Adjusting the oven temperature
control” on page 14.)
The oven was not preheated
Preheat oven when called for in recipe.
before baking.
The recipe has never been
Use only tested recipes from a reliable
tested or is not from a reliable source.
source.
The pan used is not the type or
Refer to a reliable cookbook for recom-
size recommended in the mended pan type and size.
recipe.
There is not proper air circula-
Allow 1% to 2 inches (4-5 cm) of air
tion around pan when baking.
space on all sides of pan. There must
be a minimum space of 1 inch
(2.5 cm).
Cooking utensil does not fit the
Pan should be the same size or slightly
surface unit being used.
larger than surface unit being used.
The display is
There has been a power
Reset the clock. (See page 12.)
flashing
failure.
“88:88”
Tones are
sounding and
the display is
flashing error
code
“F-1 ” _ “F-1 0”
Push CANCEL. Call for service. (See
Step 3 on page 35.)
34