Filter
Top Products
Setting
the controls
6. After the self-Cleaning cycle is
completed, the CLEAN indicator
will go off and the time-of-day will
show in the large display.
1. Make sure the Clock is set to the
correct time of day. (See “Setting
the clock” on page 5.)
2. Move the Lock Lever all the way
to the right-the Clean position.
To start cleaning immediately:
Push the Clean button. A 3-hour
Self-Cleaning cycle will be set
automatically. “3:OO” will show in
the large display. The CLEAN and
TIME indicators on the left side of
the display and the CLEAN and
ON indicators on the right side of
the display will come on.
NOTE: If the Clean button is
pushed when the door is not
latched, “door” will appear in the
large display. Move the Lock Lever
all the way to the right to latch the
door. If any other command button
is pushed when the door is
latched, “door” will appear in the
large display and you will be
unable to continue. Move the Lock
Lever back to the left to unlatch
the door after the LOCK indicator
goes off.
To delay start of cleaning: Push
the Clean button. Immediately
push the Stop Time button.
Immediately turn the Time/Temp
Set Knob to the new stop time,
three hours from the tune you want
cleaning to start. The TIME,
CLEAN, DELAY and STOP
indicators will come on.
After the Self-Cleaning cycle is
started, the LOCK indicator will
come on when the oven temp-
erature exceeds
normal
baking
temperatures. The Lock Lever
must not be moved and the door
cannot be opened when this
indicator is on.
7. When the oven reaches normal
baking temperatures, the LOCK
indicator will go off. Move the Lock
Lever back to the left. Do not force
it. Wait until it moves easily.
8. AtIer the oven is cool, wipe off any
residue or ash with a damp cloth. If
needed, touch up spots with a
soapy steel wool pad.
special tips
n
Keep the kitchen well ventilated
during the Self-Cleaning cycle to
help get rid of heat, odors and
smoke.
m Clean the oven before it gets heavily
soiled. Cleaning a very soiled oven
takes longer and results in more
smoke than usual
n
If the Self-Cleaning cycle does not
get the oven as clean as you
expected, the cycle may not’have
been set long enough or you may
not have prepared the oven
properly. Set the Self-Cleaning cycle
longer the next time and hand-clean
areas noted on page 10.
To stop the Self-Cleaning cycle
at any time:
1. Push the Set/Cancel button,
2. When the LOCK indicator goes off,
move the Lock Lever back to the
left. Do not force it. Wait until it
moves easily.
How it works
During the Self-Cleaning cycle, the oven
gets much hotter than it does for baking
or broiling . . . approximately 875°F
(468%). This heat breaks up grease and
soil and burns it off.
This graph shows approximate temp-
eratures and times during a Self-
Cleaning cycle for three hours.
Self-Cleaning cycle-three-hour setting
(Approximate temperatures and times)
1000°F
800°F
600°F
400°F
200°F
START 1 hr.
538°C
427°C
316°C
204°C
93T
11l2lus. 2hrs.
2 l/2 hrs. 3 hrs.
3 1/2hE.. STOP
Notice that the heating stops when the 3-hour setting is up, but that it takes longer for the
oven to cool down enough to unlock.
Page 11