Roper FGS397X Range User Manual


 
The oven light
The oven light will come on when you
push the Oven Light Switch on the
control panel. Push the switch again to
turn off the light.
Ektrical Shock And Personal
Injury Hazard
n
Make sum oven and light bulb
are cool and power to the oven
llm been turned off before
repking the light bulb. Failure
to do so oould result in electrical
shock or bums.
n
The bulb aver must be in place
when using the oven The cover
protecta the bulb from breaking,
and from high oven tempera-
tures. Since bulb cover is made of
glass, be careful not to drop it.
Broken glass could cause injuq.
To replace the oven light:
1. Unplug appliance or disconnect at
the main power supply.
4. Replace the bulb cover by
2. Remove the glass bulb cover in the
screwing it in clockwise. Plug in
back of the oven by screwing it out
appliance or reconnect at the main
counterclockwise.
power supply.
3. Remove the light bulb from its
NOTE: Make sure oven light is off
socket. Replace with a IO-watt
during the Self-Cleaning cycle. Keeping
appliance bulb.
oven light on will shorten bulb life.
Page 13