Filter
Top Products
OPERATING PROBLEM
Control knob(s) will not
CHECK IF
WHATTODO
n
YOU pushed in knob(s) before trying to
n
Push in knob(s) before turning.
turn.
If the Self-Cleaning cycle
will not operate.
Cooking results are not
what you expected
. The clock shows the correct time of
day.
m The Lock Lever is all the way to the
right.
#You have set a delay start time.
. Flame size fits the cooking utensil
being used.
. Pans are the size called for in the
recipe.
. You are following a tested recipe from
a reliable source.
. The cooking utensils have smooth, flat
bottoms and fit the surface burners.
. When baking, you have preheated the
oven as the recipe calls for.
. When baking, you have allowed 1 l/2
to 2 inches (4-5 cm) on all sides of the
pans for air circulation.
l
When broiling, you have completely
closed the oven door. The broiler
provides best cooking results with the
oven door closed.
n
Reset clock if necessary.
n
Slide Lock Lever all the way to the right, if
necessary.
n
Wait until the delay start time is reached.
mAdjust flame size to fit cooking UtensiL
n
Use correct-size pans.
n
Modify recipe or find a new recipe.
muse cooking utensils with smooth, flat bot-
toms.
n
Preheat the oven according to recipe’s
specifications.
n
Reposition pans for best air circulation.
n
Completely close oven door.
The oven temperature
‘Your old oven was accurate. Your old
seems too low or too high.
. If, after using the oven, you are not satisfied
oven may have shifted gradually while
with the temperature settings, they can be
your new oven may be more exact.
adjusted by an authorized RoperSY service
technician. (See “How to get service or
assistance” on page 16.)
[f there has heen a power
interruption, the display
will flash “88:88”.
. Reset the clock (page 5).
“E” followed by a number
Irom 1 to 8 shows in the
3nall display.
. Call for service. (See “How to get service or
assistance” on page 16.)
Page 15