Sears 721.676 Microwave Oven User Manual


 
Please read this owner's m_nual, It wiil tell you
how to use all the fine features of this microwave
oven,
LOCATION OF MODEL NUMBER
To request service information or replacement parts,
service center wil! require the complete model
number of your microwave oven The number is on
the oven front as shown in the illustration below.
NODELNUMBERLABEL
OVEN SPECIFICATIONS
Output Power 900W (IEC 705 Standard)
Outer"Dimensions 29-15/16" x 16-7/16'_x 15-3/8"
Cavity Volume 1,3 Cu.ft
Net Weight 58 tba.
ELECTRmCAL RATING
Electrical Rating of the Oven:120V AC 60Hz
* tl.9 Ampsi 1350 Watts ( MWO Only)
* 12.9 Amps / 1500 Watts ( MWO + Cooktop Lamp +
Ventilation Fan)
ELECTRICAL REQUIREMENTS
The oven is designed to operate on a Standard
120V/60Hz household outtet. Be sure the circuit is at
least 15A and the microwave even is the on_y
appliance on the circuit It is not designed for 50Hz ot
any circuit other than a 120W60Hz circuit,
GROUNDING INSTRUCTIONS
This appliance must be grounded. _fan electrical
short circuit occurs, grounding reduces the risk of
electric shock by providing an escape wire for the
electric current. The cord for this appliance has a
grounding wire with a grounding plug, Put the plug
into an outlet that is properly installed and grounded,
WARNING - if you use the greundingplug
improperly, you risk electric shock.
Ask a qualified etectriaan if you do not understand
the grounding instructions or if you wonder whether
the appliance is properly grounded.
Becaese this appliance fits under the cabinet, it has a
short power-supply cord, See the separate
tnata}lation Instructions for directions on properly
placing the cord Keepthe electrical power cord dry
and do not pinch or crush it in any way.
if it is necessary to use an extension cord, use only a
3-wire extension cord that has a 3-blade grounding
plug_ and a 3-slot receptacle that wift accept the plug
on the appliance. The marked rating of the extension
cord shall be equal to or greater than the electrical
rating of the appliance,
Ensure proper ground
exists before use
For a permanently connected appliance:
This appliance must be connected to a grounded
metaliic, permanent wiring system, or an equipment
grounding conductor should be run with the circuit
conductors and connected to the equipment
grounding terminal or lead on the appliance,