Sharp AR-5520N Oven User Manual


 
2
5 USER SETTINGS
ADJUSTING THE AUTOMATIC EXPOSURE
LEVEL .............................................................. 56
ABOUT THE WEB PAGE ................................ 57
HOW TO ACCESS THE WEB PAGE .............57
MONITORING THE STATUS OF THE
MACHINE ("Status" TAB) ...............................58
CONFIGURING THE NETWORK SETTINGS
("Network Settings" TAB)................................60
MANAGING THE SYSTEM INFORMATION
("System Information" TAB) ............................66
CUSTOMISING SETTINGS (System Settings)
...... 69
SYSTEM SETTINGS ......................................69
SELECTING A SETTING FOR A SYSTEM
SETTING ........................................................72
SETTINGS FOR AUDITING MODE................. 73
AUDITING MODE ...........................................73
AUDITING MODE SETTINGS ........................73
SELECTING AUDITING MODE SETTINGS
......74
6 TROUBLESHOOTING
TROUBLESHOOTING ..................................... 77
MACHINE/COPYING PROBLEMS.................78
PRINTING AND SCANNING PROBLEMS .....81
NETWORKING FAQ.......................................85
INDICATORS AND DISPLAY MESSAGES .... 90
MISFEED REMOVAL....................................... 91
MISFEED IN THE RSPF.................................91
MISFEED IN THE BYPASS TRAY .................92
MISFEED IN THE MACHINE..........................93
MISFEED IN THE UPPER PAPER TRAY ......96
MISFEED IN THE LOWER PAPER TRAY .....97
REPLACING THE TONER CARTRIDGE ........ 98
7 ROUTINE MAINTENANCE
CHECKING THE TOTAL OUTPUT COUNT AND
TONER LEVEL ................................................ 99
CHECKING THE TOTAL OUTPUT COUNT.....99
CHECKING THE TONER LEVEL ................ 100
ROUTINE MAINTENANCE............................ 101
CLEANING THE DOCUMENT GLASS AND
RSPF/DOCUMENT COVER........................ 101
CLEANING THE ORIGINAL SCANNING GLASS
(ONLY WHEN AN RSPF IS INSTALLED) ......... 101
CLEANING THE BYPASS TRAY PAPER FEED
ROLLER....................................................... 102
CLEANING THE TRANSFER CHARGER ... 102
HOW TO MANUALLY RESET THE NETWORK
SETTINGS OF THE MACHINE ..................... 103
8
PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES ............................... 104
REVERSING SINGLE PASS FEEDER........ 105
250-SHEET PAPER FEED UNIT/2 X 250-
SHEET PAPER FEED UNIT ........................ 105
STORAGE OF SUPPLIES............................. 106
PROPER STORAGE ................................... 106