Filter
Top Products
Rev 0.0 9
USER INSTRUCTIONS
EN
PROGRAM NUMBER AND
SYMBOL
DISHES AND
CUTLERY
PROGRAM
SEQUENCE
TIME CONSUMPTION
MINUTES
WATER
(1)
ENERGY
kWh (2)
6
CRYSTAL
Moderately
dirty
Cold pre-wash.
Wash at 45°C
(113°F).
Cold rinse.
Rinse at 69°C
(156.2°F).
Dry.
(*)
10.8 l
2.85
gal.
1.15
7
NORMAL
Moderately
dirty
Cold pre-wash.
Wash at 55°C
(131.00°F).
Cold rinse.
Rinse at 68°C
(154.4°F).
Dry.
(*)
14.8 l
3.91
gal.
0.8
8
AUTO
SUPER
WASH
ETL
SANITATION
LISTED
Moderately
dirty, including
dried-on
residue
Cold pre-wash
(Depending of
the type of dirty)
65°C (149°F).
Hot rinse at
70°C (158°C).
Dry.
(*)
11-15 l
2.91-
3.96
gal.
1-1.2
9
EXTREME
WASH
ETL
SANITATION
LISTED
Very dirty pans
and dishes,
including
dried-on
residue
Pre-wash at
45°C (113°F).
Wash at 70°C
(158°F).
2 cold rinses.
Rinse at 70°C
(158°F).
Dry.
(*)
18.3 l
4.83
gal.
1.12
Tab. 2-03b
(*) see display.
(1) Average water consumption with the softener set to level 0 (zero).
Any other setting will increase water consumption till 2.5 l (0.66 gal.) / cycles with setting 5.
(2) The cycle times listed in the use and care manual are based on normal soil loads and 120°F
(49°C) incoming water and will vary based on your actual conditions.
- Only “AUTO SUPER WASH” and “EXTREME WASH” programmes conforms to NSF std 184 and
are certifi ed by INTERTEK with the ETL SANITATION LISTED.
- When the “AUTO PROGRAMMES” are selected, the dishwasher recognizes the type of dirt and
automatically adjusts the washing parameters as appropriate.
When the “Sani light” (sanitation light) appears on the display, it means that the dishwasher and its
contents have been sanitised according to the requirements of the National Sanitation Foundation
(NSF).