Smeg PLA8743X Dishwasher User Manual


 
40 Rev 0.0
USER INSTRUCTIONS
EN
If the dishes fail to dry or remain dull, check that:
there is rinse aid inside the special container;
the rinse-aid dispenser setting is correct;
the detergent used is of good quality and has not lost its effectiveness (for
example, through incorrect storage, with the box left open).
If the dishes show signs of streaking, staining, etc., check
that:
the rinse aid dispenser setting is not too high.
If there are visible traces of rust inside the tank:
the tank is made of steel, and therefore any rust marks are due to external
elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special
products are commercially available to remove such marks.
check that the amount of detergent being used is correct. Certain deter-
gents can be more corrosive than others.
check that the cap of the salt container is securely closed, and that the water
softening setting is correct.
IF AFTER PERFORMING THE ABOVE TROUBLESHOOTING IN-
STRUCTIONS THE PROBLEM PERSISTS, CALL THE NEAREST
TECHNICAL ASSISTANCE CENTRE.
WARNING: ANY OPERATIONS PERFORMED ON THE APPLI-
ANCE BY UNAUTHORIZED PERSONS ARE NOT COVERED BY
THE WARRANTY AND SHALL BE PAID FOR BY THE USER.