Filter
Top Products
The dishes were not
loaded corre ctly.
See notes in " Loadi ng the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft w ater and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those m ar ks.
Re-loading the dishes properl y.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/Refill the rinse-aid
dispens er.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short programmes the washing temperature is lower.
This also lowers cleaning performance. Choose a
programm e with a long washing time.
Water drainage is more difficult wi th th ese items.
Cutlery or dishes of this t ype are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not enough detergent
was d ispensed.
Item ar e blocking
the pat h of sp ay arms.r
The filt er combination
inthebaseofwash
cabinet is not clean or
is not correctly fit t ed.
This may cause
the sp ay arm je ts
to get blocked.
r
Combination of sof t
water and too much
detergent.
Aluminum utensi ls
have rubbed aga inst
dishes.
Dishes block
detergent cups.
Improper loading
Too littl e rinse-aid
Dishes are removed
too soon.
Wrong programme
selection
Using cutlery wi th
a low-quality coatin g
If overflow occur s, turn off the main water supply bef ore calling a service.
If ther e is water in the base pan beca use of an overfill or small leak,
the w ater should be removed befor e restarting the dishwash er.
18
Uns a ti s
-factory
was hin g
res u lt
Uns a ti s
-factory
dry i ng
res u lt
Wh en some malfunct ions come o n, the ap pliance will d isplay error cod es to warn you:
Longer inle t time.
Faucet s is not opened , or w ater in take is restricted,
or water pressureis too low.
Some ele men t of dishwasher leaks .
Overflow .