Sub-Zero Freezer Freezer User Manual


 
SERVICE INFORMATION
If you need service, be sure to have the model
and serial number when you call. You’ll find
t
hese numbers on the model and serial
number on the plate at the top frame of the
unit inside the door.
Contact a Sub-Zero Factory Authorized Service
C
enter, a Sub-Zero dealer, or the Sub-Zero
Customer Service Department, P. O. Box 44130,
Madison, WI 53744-4130, call 800-222-7820 or
e-mail customerservice@subzero.com.
23
If you are storing or disposing of your old
refrigerator or freezer, please do it safely.
Remove the doors or tightly secure the
doors closed. Child entrapment accidents
can be tragic.
CONTACT
INFORMATION
Sub-Zero
Customer Service:
800-222-7820
Website:
subzero.com
E-mail Address:
customerservice@
subzero.com
SERVICE INFORMATION
The information and images in this book are the
copyright property of Sub-Zero Freezer Company, Inc.
Neither this book nor any information or images
contained herein may be copied or used in whole or
in part without the express written permission of
Sub-Zero Freezer Company, Inc.
©
Sub-Zer
o Freezer Company, Inc. all rights reserved.
INSTALLATION CHECKLIST
Has the unit been secured in place with the
provided anti-tip blocking kit or is there
c
learance of 1" (25) or less between the unit
and a solid soffit?
Are both front leveling legs extended down
to make contact with the floor? Is the unit
level?
Is the power cord plugged into a properly
grounded 3-prong outlet, which has been
installed in accordance with all applicable
electrical codes?
Is the water supply connected for units with
an automatic ice maker? Have you checked
for leaks?
Is the drain pan in the proper position? Has
the kickplate been installed properly?
Are panels attached securely and properly
aligned?
Have the door(s) been aligned for proper
appearance and operation?
Have all accessories been installed?
Have any installation/service problems
been noted on the product registration
card? Has the registration card been
mailed in?
Have stainless steel door(s) been inspected
for any imper
fections? This is to be done
by the dealer/installer with the customer
upon completion of the installation.
NOTE: Classic, platinum and carbon stain
-
less steel panels are covered by a limited
60-day parts and labor warranty for
cosmetic defects.