Sunbeam EM8800 Espresso Maker User Manual


 
27
Replace the grinding ring.
Slide the ‘grinding mechanism release’
button to the front in the direction of the
grinding mechanism. Hold this position
and turn the ‘coffee grind’ lever anti-
clockwise to the desired grind setting.
Replace the ‘coffee bean hopper’ in
position ‘HOPPER RELEASE’ and turn it to
the coffee beans position. Now test the
function of the grinding mechanism with a
small quantity of beans and make a cup of
coffee.
Grind setting selection and maintenance (continued)
Figure 43
Figure 42
Figure 44
Resetting the Café Barista
With this function, all previously changed
values can be reverted back to the original
settings for the Café Barista™.
Press buttons ‘CLEAN’ and ‘DESCALE’
simultaneously. Hold the buttons depressed
until all the lights on the control panel
turn off (takes approximately 3 seconds).
Release the ‘CLEAN’ and ‘DESCALE’
buttons and the Café Barista™ is now
reset.