Filter
Top Products
10
1. Place the DURALITE™ jug on the motor
base by locating it over the four non-slip
rubber jug mounts. The jug can be
placed on the motor base in four different
positions.
2. Place ingredients into the DURALITE™
jug.
Note: Do not operate the blender when the
jug is empty.
3. Place the lid firmly into position on the
DURALITE™ jug. Always ensure the
measuring cap is in place when processing,
except when the processing baton is
inserted through the opening in the lid; or
when adding ingredients through the hole
in the lid.
Note: Always have the lid in position during
processing.
4. a) Using the speed dial:
Using the variable speed dial, select the
desired processing speed from 1 – 5 and
this will provide continuous processing until
the dial is turned anti-clockwise to the ‘0’
position.
Due to the high processing speed of the
Café Series® Blender, processing times are
significantly reduced over those of standard
blenders. Therefore we advise that until
you are familiar with the speed of the Café
Series® Blender that you keep a close watch
on ingredients being processed.
Tip: Use the ‘Slow Start’ feature to combine
ingredients at the start of blending. To do
so, press the ‘Slow Start’ function button
first, then turn the speed dial to the desired
speed. The blender will slowly ramp up its
speed to this chosen speed setting.
Tip: Once processing has commenced, further
ingredients can be added by removing the
measuring cap and pouring ingredients
through the hole in the lid.
Note: Wait until blade comes to a complete
stop before removing the lid or jug.
4. b) Using a pre-programmed function:
Select the desired function by pressing
the appropriate function button. The
blender will start to operate and only the
selected function button will illuminate.
On completion of the task, the motor will
stop and all function buttons will illuminate
indicating that these are now available again.
Note: The ‘Slow Start’ must be used in
combination with the variable speed dial.
Please refer to 4.a.
Before a new function can be selected, the
previous function must be stopped.
To stop blending at any time, press the
selected function button.
Tip: Once processing has commenced, further
ingredients can be added by removing the
measuring cap and pouring ingredients
through the hole in the lid.
Note: Wait until blade comes to a complete
stop and all function buttons illuminate
before removing the lid or jug.
Operating your Café Series
®
Blender