Filter
Top Products
SAFETY PRECAUTIONS FOR YOUR
SUNBEAM CAFÉ SERIES BLENDER
PB9800.
• Ensure fingers are kept well away from the
blades when in use. The processing baton
may be used while the motor is running with
the main part of the lid in place.
• Always operate on a flat level surface.
• Ensure the control dial is in the “OFF”
position and the jug is in place before
plugging into the power outlet.
• Do not operate on low speed for more than
30 seconds at a time when blending heavy
loads.
• Always remove the plug from the power
outlet when the blender is not in use, before
disassembling, putting on or taking off parts,
and before cleaning other than washing the
jug.
• Blade is sharp, handle carefully.
• Always operate the blender with the lid in
place.
• When using heavy loads, the blender should
not be operated for more than 15 seconds.
This does not apply to any of the recipes
detailed in this instruction booklet.
• Do not place the blade assembly onto the
motor base without it being correctly fitted to
the jug.
• The maximum load capacity of the jug is
2 litres, and substantially less with thick
mixtures.
• When making peanut butter (or other nut
butters, or oil based foods) do not process
for more than one minute after mixture
starts circulating. Over-processing will cause
the mixture in the jug to overheat. Do not
process more than 500g of nuts at a time.
• Jug should not be more than 2/3 full when
the processing baton is left in place while
blending. Do not exceed 30 seconds of
continuous blending with processing baton in
place.
• The blender is fitted with a safety switch to
prevent the motor operating unless the jug is
in place.
• Do not blend warm/hot ingredients. Allow
ingredients to cool to room temperature
before placing in jug.
Sunbeam’s Safety Precautions
4