Filter
Top Products
13
Model BC12 Operating Procedures
091020
Pulse Switch Operation
Make sure your hands are clean and sanitized
before performing these steps.
Step 1
Place the power switch in the ON pos ition.
Figure 17
Step 2
Hold the c up under the agitator and lift up, so the
agitator touches the bottom of the cup.
Figure 18
Step 3
Press the puls e switch to start the agitator.
Figure 19
Step 4
With a swirling motion, gradually move the c up up
and down over the spinning agitator and completely
around all sides of the cup. Swirl the cup around the
agitator to produce a pleasing product appearance
and to av oid leaving a hole in the center of the
mixture.
Figure 20
Step 5
Before removing the cup, allow excess mixture to be
thrown off the agitator and be caught by the cup or
lid/collar.