Taylor 067802-M Blender User Manual


 
3
Model BC12 Safety
Section 3 Safety
Taylor is c oncerned about t he safety of the oper ator
when he or she comes in contact with the blender
and its parts. Taylor has gone t o extreme efforts to
provide built-in safety features to protect both you
and the s ervice technician. As an ex ample, warning
labels have been attached to the unit to f urther point
out safety precautions to the operator.
IMPORTANT - Failure to adhere to the
following safety precautions may result in
severe personal injury or death. Failure to
comply with these warnings may damage the
machine and its components. Component
damage will result in part replacement expense
and service repair expense. SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE
To Operate Safely:
DO NOT operate the unit without reading
this operator's manual. Failure to follow this
instruction may r esult in equipment damage, poor
performance, health hazards, or personal injury.
DO NOT use a water jet to clean or rinse
the unit. Failure to follow these instructions may
result in serious electrical shock.
S DO NOT operate the unit unless it is
properly grounded.
S DO NOT operate the unit with lar ger fuses
than specified on the data label.
S DO NOT attempt any repairs unless the
main power s upply to the unit has been
disconnected. Note: Contact your local
authorized Taylor Distributor for service.
S DO NOT use this appliance out doors.
S DO NOT operate this appliance if the power
cord is damaged.
S DO NOT let the power cord hang over the
edge of the t able or counter.
S Supply cords used with t his unit shall be
oil-resistant, sheathed flexible cable not
lighter than ordinary polychloroprene or
other equivalent synthetic
elastomer-sheathed cord (Code des ignation
60245 IEC 57) installed with the pr oper c ord
anchorage to relieve conductors from strain,
including twisting, at the terminals and
protect the insulation of the c onductors from
abrasion.
Failure to follow these instructions may result in
electrocution. Contact your local authorized Taylor
Distributor for service.