Taylor 067802-M Blender User Manual


 
4
Model BC12Safety
S DO NOT allow children or untrained
personnel to operate this machine.
S DO NOT operate the unit unless all service
panels and access doors are restrained with
screws.
S AVOID contact with the agitator shaft and
other moving parts.
S Make sure the splash guar d is installed prior
to operating the appliance.
S DO NOT disassemble or install parts unless
the control switch is in the “OFF” position.
S Always use the foot pedal guard, and av oid
accidental use of the foot pedal. When using
the foot pedal, make sure the appliance is
located where accidental contact with the
pedal is not likely. When the blender is not
in use, place the front switch in the “OFF”
position to avoid accidental use of the pedal.
(Note: Some international units are not
equipped with this feature.)
Failure to follow these instructions may result in
severe personal injur y f rom hazardous moving par ts.
DO NOT allow the power cord to hang over
the edge of t he counter or touch hot surfaces.
Failure to comply may result in an electrical fire or
serious electrical shock.
DO NOT operate this appliance if it
malfunctions or is dam aged in any way. Failure to
follow this instruction may result in injury or
component damage.
DO NOT use attachments not
recommended or s old by Taylor. Doing so may
cause fire, electric shock, injury, or equipment
damage.
Make sure the blender is sitting or mounted
solidly on a sturdy surface during oper ation. Failure
to comply may result in injur y or equipment damage.
Some consumers are highly allergic to peanuts,
peanut oil, and peanut dust. In some severe
cases, peanut allergy reactions can cause death.
When blending product with peanuts, make sure
excess product is cleaned from the agitator shaft
to eliminate the fear of product carryover.
WARNING!