Filter
Top Products
1
Model BC12 To the Installer
Section 1 To the Installer
This machine is designed for indoor use only.
DO NOT installthemachineinanarea
where a wat er jet could be used to clean or rinse the
machine. Failure to follow t his instruction may result
in serious electrical shock.
Electrical Connections
In the United S tates, this equipment is intended to
be installed in accordance with the National
Electrical Code (NEC), ANSI/NFPA 70-1987. The
purpose of the NEC code is t he practical
safeguarding of persons and property from hazards
arising from the use of electricity. This code contains
provisions considered necessary for safety.
Compliance therewith and proper maintenance will
result in an installation essentially free from hazard!
In all other ar eas of the world, equipment should be
installed in accordance with the existing local codes.
Please contact your local authorities.
FOLLOW YOUR LOCAL ELECTRICAL CODES!
Each unit requires one power supply. Check the
data labels on the unit for fuse, wire am pacity and
electrical specifications. Refer to the wiring diagram
for proper power connections.
CAUTION: THIS EQUIPMENT MUST BE
PROPERLY GROUNDED! FAILURE TO DO SO
CAN RESULT IN SEVERE PERSONAL INJURY
FROM ELECTRICAL SHOCK!
Supply cords used with t his unit shall be
oil-resistant, sheathed flexible cable not lighter than
ordinary polychloroprene or other equivalent
synthetic elastomer-sheathed cord (Code
designation 60245 IEC 57) installed with the proper
cord anchorage to relieve c onductors from strain,
including twisting, at the terminals and protect the
insulation of the conductors from abrasion.