10
Important: To The Operator
Model 104
Section 5 Important: To The Operator
Figure 4
ITEM
DESCRIPTION
1 CONTROL SWITCH
2 ORANGE DIAL LIGHT
3 TIMER CONTROL
4 DOOR HINGE
Control Switch (Item 1)
When the control switch is placed in the AUTO mode
and the timer is adjusted to the desired setting, the
refrigeration system will operate. When the switch is
placed in the EJECT mode, only the beater motor will
operate.
Orange Dial Light (Item 2)
Located below the control switch is an orange dial light.
When the control switch is in the AUTO position, this
light will come on, indicating the refrigeration system
is operable when the timer is set.
Safety
NEVER empty the contents of the freezing cylinder
while the control switch is in the AUTO position.
Always put the control switch into the EJECT position
when drawing product from the freezing cylinder. As a n
additional safety feature, this unit will NOT operate if
the door is open.