Filter
Top Products
29
Model C722 Operating Procedures
Step 18
Slide the pivot pin through the draw handles as the
handles are inserted into the draw valves.
Figure 54
Note: This freezer features three adjustable draw
handles to provide portion control, giving a better
consistent quality to your product and controlling
costs. The draw handle should be adjusted to
provide a flow rate of 5 to 7-1/2 oz. (142 g. to
213 g.) of product by weight per 10 seconds.
To INCREASE the flow rate, tighten the screw. To
DECREASE the f low rate, loosen the screw.
Figure 55
Step 19
Snap the design caps over the bottom of the door
spouts.
Figure 56
Step 20
Slide the drip pan into the hole in the front panel.
Figure 57
Step 21
Install the front drip tray and splash shield under the
door spouts.
Figure 58