Filter
Top Products
15
Model 161 Operating Procedures
Step 9
Slide thetwo o--rings into the grooves on the remaining
draw valves and lubricate.
Figure 13
Step 10
Lubricate the insideof the freezer door spouts from the
bottom. Insert the draw valves into the freezer door
fromthebottomuntil theslot inthe drawvalves comes
into view.
Figure 14
Step 11
Slide the o--ring onto each pivot pin and lubricate.
Figure 15
Step 12
Slide the tip of the draw handle into the slot of the draw
valve, starting from the right. Slide the short pivot pin
through the far right draw handle. Slide the long pivot
pin through the far left and middle draw handles.
Figure 16