Filter
Top Products
25
Model 161 Troubleshooting Guide
PROBLEM PROBABL E CAUSE REMEDY PAGE
REF.
9. The unit goes out on
overload excessively.
a. There are too many
appliances plugged into
the circuit.
a. A separate 20A circuit is
needed for the freezer to
operate properly.
-- -- --
b. An extension cord has
been placed between the
power cord and the wall
receptacle.
b. If the extension cord is
used, it must match the
power cord in size of
circuit ampacity.
-- -- --
10. Mix from one freezing
cylinder bleeds over to the
second cylinder.
a. The center draw valve
seal is worn, or is
improperly lubricated.
a. Lubricate properly and
replace seal every 3
months.
14 / 26