Filter
Top Products
5.
CAUTION: DO NOT ATTEMPT THE OPERATE WITHOUT
COLLAR, BLADES, GASKET, CONTAINER, LID AND LID INSERT
PROPERLY IN PLACE.
7. Plug into 120 V ~ 60 Hz AC outlet.
8. To start the blender, press the ON/OFF switch located at the back of
the blender base to the ON position (I), see Figure 4. Note: Whenever
the blender is switched on, the LOW button indicator light will be on.
9. Refer to Figure 6. LOW SPEED MODE (SPEEDS 1-6): Press the
LOW button and the LOW indicator light will come on. Press and
release the desired speed (STIR, AERATE, CHOP, SHRED, GRATE
or BLEND). The selected speed light will come on. You may select
another low speed by pressing a different speed button. The
blender will continue to operate until you press the OFF button.
The OFF is also the PULSE (LOW SPEED MODE) and the ICE
CRUSHER (HIGH SPEED MODE) button.
HIGH SPEED MODE (SPEEDS 7-12): Press the HIGH button and
the HIGH indicator light will illuminate. Press and release the
desired speed (MIX, WHIP, BEAT, PUREE or LIQUEFY). The
selected speed light will come on. You may select another high
speed by pressing a different speed button. The blender will
continue to operate until you press the OFF button. Note: To
change from a high speed to a low speed or from a low speed to a high
speed, press the STOP button, then choose the LOW or HIGH speed and
follow directions in step #9.
PULSE: Press the HIGH button and the HIGH indicator light will
come on. Quickly press and release or press and hold the PULSE
button for the desired length of time. To stop the blender, release
the PULSE/STOP button. NOTE: DO NOT use the PULSE
feature on LOW speed. Always use the PULSE feature on HIGH
SPEED.
FIGURE 6