Filter
Top Products
RECEIPT AND INSTALLATION
RECEIPT:
It is essential to inspect the unit immediately when it arrives. TOASTMASTER
®
has placed instructions on the
packaging to help avoid damage in transit. However, negligent handling can produce hidden damage. These steps
should be followed:
A. Inspect the entire perimeter of the package for damage or punctures to the packing material. This may indicate
damage to the unit inside. Call any and all damage to the attention of the delivery person.
B. If any packing damage is found, uncrate the unit immediately in the presence of the delivery person to determine if
the unit is damaged. If any damage is found, indicate the type and amount of damage on the shipping documents
and notify TOASTMASTER
®
at (906) 863-4401 immediately after ling a freight claim.
C. Uncrate the unit carefully and check the entire unit (top, front, back and both sides) for any visible or hidden
damage.
D. Remove the unit from the shipping pallet and inspect the bottom for any damage.
E. If any damage is noted after the driver leaves, immediately contact the freight company and TOASTMASTER
®
.
F. Check the Oven Door. Make sure the Door closes completely, and that the Door Gasket seals rmly (refer to
the DOOR TEST PROCEDURE in the SERVICE AND REPLACEMENT GUIDE). If the Gasket does not seal
correctly please contact the TOASTMASTER
®
Service Department for instructions and assistance in any required
adjustments.