Filter
Top Products
EDITING A FOOD ITEM
Changing the Edit Pin Number
By default, the number is “9.” For
instructions on changing the number,
contact Customer Service at 800.90 or
+1 214-379-6000.
Editing a Food Item
1. From the or mode,
simultaneously press the and keys.
2. Enter the code “9” and press .
3. Using the and arrow keys, change the
cook cavity set temperature (if necesary). This is
the temperature at which all items will cook.
4. Press .
5. Select the group that contains the food item you
wish to edit by pressing the adjacent soft key
(Figure 22).
NOTE: If necessary, press the arrow key
to scroll to display the second set of food groups.
6. Select the food item you wish to edit by pressing
the adjacent soft key.
7. Adjust the following components of a food item
(see Figure 23 - to navigate from field to field,
press the or key):
a. Group Name - Press the top-left or top-right
soft key to move from one character to another
in the group name field.
To change a character, use the numeric keypad
to enter a letter or number. NOTE: “1”
contains punctuation marks. Also, press “0”
once for a blank space, or twice for a “0.”
b. Item Name - Edit process same as “Group
Name,” above.
c. Cook Time - Enter the cook time using the
numeric keypad.
d. IR Set Temp - Enter the IR set temperature
using the numeric keypad. The setting will
round to the nearest 50ºF increment (20ºC
increment).
e. Events 1 through 6 - Edit using the numeric
keypad. For more information on events 1
through 6, see page 12.
8. If testing the new settings is required:
a. Wait until the ‘Warming Up” message
disappears from the bottom of the screen.
b. Insert food item into cook cavity.
GROUP
A
EDIT GROUPS
GROUP
B
GROUP
C
GROUP
D
GROUP
E
GROUP
F
GROUP
G
GROUP
H
22: Group Select Screen (Edit Mode)
ITEM 1
< GROUP A >
%TIME
COUNT 0
COOK TIME 01:30
WARMING UP
%AIR %WAVE
1
2
3
4
5
6
25
9
24
18
24
0
10
50
10
30
40
10
0
30
0
40
0
0
TEST
SAVE
IR SET TEMP 1150
0
0F
23: Edit Recipe Screen
OPERATING THE TORNADO
OVEN
17
SET TEMP 500
O
F
PRESS "ENTER"
OVEN
OFF
: Edit Temperature Screen