Filter
Top Products
WARNING: Inside of oven is HOT! Insert
food with caution.
c. Close the oven door and press the bottom-left
soft key to test the new settings.
d. Follow steps 5-8 in the section titled
, pages 15-16.
9. Press the bottom-right soft key to save the new
settings. Doing so will permanently replace old
item settings.
10. When done editing recipes, press the key
until returned to the or
screen.
CHANGING THE IDLE IR SET TEMPERATURE
WARNING: The idle IR set temperature is
pre-determined by the menu developer.
Changing this setting is not recommended,
unless performed by the menu developer or
TurboChef Culinary or Engineering staff.
Valid idle IR settings range between 500-1150ºF
(260-620ºC). The temperature will be rounded to
the nearest 50ºF (20ºC) increment.
To change the idle IR set temperature:
1. From the or mode, simulta-
neously press the and keys.
2. Enter the code 9-4-2-8 (W-H-A-T) and press
.
3. Press the key to scroll to screen 2 of the
mode.
4. Press the soft key adjacent to “IR SI” (bottom-
right soft key) and press .
5. Using the Numeric Keypad, enter a new idle IR
set temperature.
6. Press to confirm the change.
7. Continually press the key to return to the
/ mode.
As a general rule, the idle IR set temperature
should be the average of all food item IR set
temperatures (typically 1000ºF). This prevents the
IR element from having to drastically warm up or
cool down between cook cycles.
ENABLING/DISABLING THE EDIT MODE
The mode can be disabled to prevent
unauthorized editing of food items/cook cavity set
temperature.
To enable/disable the mode:
1. From the or mode,
simultaneously press the and keys.
2. Enter the code 8-4-3-3 (T-I-D-E) and press
.
3. When prompted, pressing “9” will enable
mode. Pressing any other numeric key will
disable mode.
COOKING OPTIONS TIME, DONE, AND
SNOOZE
The “Enter Cook Time” Screen
Enable the screen to provide the
option to change the cook time of a recipe before a
cook cycle initiates (see page 15).
To enable/disable the screen:
1. From the or mode, simulta-
neously press the and keys.
2. Enter the code 8-4-6-3 (T-I-M-E) and press
.
3. When prompted, pressing “9” will enable the
screen. Pressing any other
numeric key will disable the
screen.
18
OPERATING THE TORNADO
OVEN