Turbo Chef Technologies Tornado 2 Double Oven User Manual


 
The “Done” Screen
Enable the  screen to provide the option to:
- Cook an item longer after the completion of a
cook cycle.
- Save a changed cook time (only if the 
  screen is also enabled).
See page 16.
To enable/disable the  screen:
1. From the   or  mode, simulta-
neously press the  and  keys.
2. Enter the code 3-6-6-3 (D-O-N-E) and press
.
3. When prompted, pressing “9” will enable the
 screen. Pressing any other numeric key
will disable the  screen.
The “Snooze” Mode
Enable the  screen to allow for fast oven
recovery whenever the oven is turned off.
When the oven is in  mode, all oven
operations are turned off, but the heaters remain on.
The cook cavity will remain at the set temperature
and the actual IR temperature will drop 200ºF
(104ºC) below the IR set temperature.
By default,  mode is disabled.
To enable/disable  mode:
1. From the   or  mode, simulta-
neously press the  and  keys.
2. Enter the code 7-6-6-9 (S-N-O-Z) and press
.
3. When prompted, pressing “9” will enable the
 mode. Pressing any other numeric key
will disable the  mode.
To access  mode:
1. Ensure  mode is enabled (see preceding
steps).
2. From the  mode, press the  key to turn
the oven off.
3. Press the bottom-left soft key to enter 
mode, or press the bottom-right soft key to
proceed to the   mode.
4. If  mode was selected, the oven will
enter  mode. From  mode, press
the bottom-left soft key to proceed to the
  mode, or press the bottom-
right soft key to turn the oven back on.
OPERATING THE TORNADO
OVEN
19