Filter
Top Products
K. VM Standard Shelf Installation Instructions
9
Step 1 Step 2
Make sure plastic end caps are on the
front left and right sides of the shelf
before the installation process.
*Note: Putting shelving in the cabinet
without end caps will cause
damage to the interior!
Tilt shelf at an angle and insert into
cabinet.
Step 3
Insert the front shelf peg into the support
hook on the side of the cabinet interior.
Keep opposite shelf peg between front
of upright support and door.
*Note: VM-1’s do not have an upright
support, place in opposite hook
area.
Step 4
Position the rear of the shelf at the
desired level using the peg from step 2
as the pivot point. Rest the rear corner
of the shelf on the rear side support first,
then lift and pivot shelf on to the
supporting center of the cabinet interior.
Section 2- InstallationSection 2- Installation