Filter
Top Products
D. VM-2SL Sliding Glass Door Shim Insertion Instructions (continued)
1. If cabinet has gap(s) between sliding glass door and frame, place shim(s) as shown on page
19.
2. Remove door(s) from the frame by grasping firmly on both ends and lifting the door(s) up
towards the top frame and pulling out towards you (Fig.2).
3. Turn door(s) over and remove two nuts from the roller assembly with a 1/4” nut driver (Fig.3).
*Note: Be careful not to lose the nut
s when taking out the roller assembly. Extra nuts do not come
with the shim(s) when requested.
21
Figure 2
Figure 3
Section 5 - Service
Section 5 - Service