Filter
Top Products
L. Assembling and Installing VM-2 & VM-2SL Beverage Organizer Shelf (continued)
Section 2- Installation
Section 2- Installation
Step 5
Hold the divider evenly. Grasp the
divider above the back hook and gently
snap the divider over the rear support
rod on the shelf.
Step 6
Make sure that the rear bar is seated
within the hook snugly as shown.
Step 7
After installing all product dividers to
the proper spacing, place the product
glides in between the dividers and
snap them gently on to the shelf rails.
Step 9
Add the product of choice on to the
beverage organizer shelf.
Step 8
Place completed beverage organizer
shelf into the Victory Merchandiser
(VM). Locate the front support one or
two spaces below the rear gravity feed.
“End Of Section, Click Here For Table Of Contents”