Filter
Top Products
L. Assembling and Installing VM-2 & VM-2SL Beverage Organizer Shelf
Victory organizer shelves have adjustable product dividers that allow for merchandising a variety
of products without the need to purchase multiple unique fixed dividers. Before installing the
dividers on the shelf, determine the required spacing for the product that will be displayed.
Each shelf kit includes the following:
a. One (1) Organizer Shelf with Front Product Stop - Part No. 50849601
b. Eight (8) Adjustable Product Divider Bars - Part No. 50849701
c. Seven (7) Snap-On Product Glides - Part No. 50808202
*Note:Prior to shelf kit installation, make sure shelf end caps are on the front right and
left sides of the shelves before the installation process. Refer to step 1 on page 9.
Instructions:
11
Step 1
Start installing the dividers at one end of
the shelf and work across to the other
side. Prepare the product divider for
installation by positioning it over the
shelf as shown.
Step 3
Attach the “J” hook to the front bottom
bar of the shelf.
Step 4
Rotate the product divider over the
shelf to lock the back hook of the
product divider evenly at the rear of the
shelf.
Step 2
Position “J” hook at the front of the
shelf so that it can be hooked to the front
bar as shown above.
Section 2- Installation Section 2- Installation