Filter
Top Products
Niagara 4100 User Guide
ViewCast 101
Configuring email/SMTP settings
Figure 121. Email/SMTP Settings fields
To configure email settings:
1.
Enter the email address you want the system to send the email. Separate multiple email
addresses with a comma.
2.
Enter a valid originating email address.
3.
Enter a subject line for your email alert.
To configure SMTP (mail) settings:
1.
Enter the SMTP user name for server access.
Note: If you are unfamiliar with setting up an SMTP email account for sending email,
contact your network administrator for assistance.
2.
Enter the password if required.
Note: For security purposes, the password for your account does not display once the
system enters it into the Niagara 4100 settings. Although this field appears blank after
you click Submit, the system retains the password information.
If you change any information in this dialog box, you need to re-enter your SMTP
password before clicking Submit. Not doing so overwrites the previously entered
password with a blank entry.
3.
Enter the name of the SMTP server.
4.
Click the Save and Send Test Email to test your settings. The resulting window reports the
email as successful or it sends information that a send failure occurred.
5.
Click Submit.